Security Tips for Linux Servers

Security Tips for Linux Servers

1. Physical System Security

Configure the BIOS to disable booting from CD/DVD, External Devices, Floppy Drive in BIOS. Next, enable BIOS password & also protect GRUB with password to restrict physical access of your system.

2. Disk Partitions

It’s important to have different partitions to obtain higher data security in case if any disaster happens. By creating different partitions, data can be separated and grouped. When an unexpected accident occurs, only data of that partition will be damaged, while the data on other partitions survived. Make sure you must have following separate partitions and sure that third party applications should be installed on separate file systems under /opt.

/
/boot
/usr
/var
/home
/tmp
/opt

3. Remove Unwanted Services to Minimize Vulnerability

Find and remove or disable unwanted services from the server to minimize vulnerability. Use the ‘chkconfig‘ command to find out services which are running on runlevel 3.

# /sbin/chkconfig --list |grep '3:on'

Once you’ve find out any unwanted service are running, disable them using the following command.

# chkconfig serviceName off

Use the RPM package manager such as “yum” or “apt-get” tools to list all installed packages on a system and remove them using the following command.

# yum -y remove package-name
# sudo apt-get remove package-name

4. Check Listening Network Ports

With the help of ‘netstat‘ networking command you can view all open ports and associated programs. As I said above use ‘chkconfig‘ command to disable all unwanted network services from the system.

# netstat -tulpn

5. Secure Shell(SSH)

SSH is a secure protocol that use encryption technology during communication with server. It’s also recommended to change default SSH 22 port number with some other higher level port number. Open the main SSH configuration file and make some following parameters to restrict users to access.

# vi /etc/ssh/sshd_config
Disable root Login
PermitRootLogin no
Use SSH Protocol 2 Version
Protocol 2

6. Keep System updated

Always keep system updated with latest releases patches, security fixes and kernel when it’s available.

# yum updates
# yum check-update

7. Lockdown Cronjobs

Cron has it’s own built in feature, where it allows to specify who may, and who may not want to run jobs. This is controlled by the use of files called /etc/cron.allow and /etc/cron.deny. To lock a user using cron, simply add user names in cron.deny and to allow a user to run cron add in cron.allow file. If you would like to disable all users from using cron, add the ‘ALL‘ line to cron.deny file.

# echo ALL >>/etc/cron.deny
  1. 11 Cron Scheduling Examples in Linux

8. Disable USB stick to Detect

Many times it happens that we want to restrict users from using USB stick in systems to protect and secure data from stealing. Create a file ‘/etc/modprobe.d/no-usb‘ and adding below line will not detect USB storage.

install usb-storage /bin/true

9. Turn on SELinux

Security-Enhanced Linux (SELinux) is a compulsory access control security mechanism provided in the kernel. Disabling SELinux means removing security mechanism from the system. Think twice carefully before removing, if your system is attached to internet and accessed by the public, then think some more on it.

SELinux provides three basic modes of operation and they are.

  1. Enforcing: This is default mode which enable and enforce the SELinux security policy on the machine.
  2. Permissive: In this mode, SELinux will not enforce the security policy on the system, only warn and log actions. This mode is very useful in term of troubleshooting SELinux related issues.
  3. Disabled: SELinux is turned off.

You can view current status of SELinux mode from the command line using ‘system-config-selinux‘, ‘getenforce‘ or ‘sestatus‘ commands.

# sestatus

If it is disabled, enable SELinux using the following command.

# setenforce enforcing

It also can be managed from ‘/etc/selinux/config‘ file, where you can enable or disable it.

10. Remove KDE/GNOME Desktops

There is no need to run X Window desktops like KDE or GNOME on your dedicated LAMP server. You can remove or disable them to increase security of server and performance. To disable simple open the file ‘/etc/inittab‘ and set run level to 3. If you wish to remove it completely from the system use the below command.

# yum groupremove "X Window System"

11. Turn Off IPv6

If you’re not using a IPv6 protocol, then you should disable it because most of the applications or policies not required IPv6 protocol and currently it doesn’t required on the server. Go to network configuration file and add followings lines to disable it.

# vi /etc/sysconfig/network
NETWORKING_IPV6=no
IPV6INIT=no

12. Restrict Users to Use Old Passwords

This is very useful if you want to disallow users to use same old passwords. The old password file is located at /etc/security/opasswd. This can be achieved by using PAM module.

Open ‘/etc/pam.d/system-auth‘ file under RHEL / CentOS / Fedora.

# vi /etc/pam.d/system-auth

Open ‘/etc/pam.d/common-password‘ file under Ubuntu/Debian/Linux Mint.

# vi /etc/pam.d/common-password

Add the following line to ‘auth‘ section.

auth        sufficient    pam_unix.so likeauth nullok

Add the following line to ‘password‘ section to disallow a user from re-using last 5 password of his or her.

password   sufficient    pam_unix.so nullok use_authtok md5 shadow remember=5

Only last 5 passwords are remember by server. If you tried to use any of last 5 old passwords, you will get an error like.

Password has been already used. Choose another.

13. How to Check Password Expiration of User

In Linux, user’s passwords are stored in ‘/etc/shadow‘ file in encrypted format. To check password expiration of user’s, you need to use ‘chage‘ command. It displays information of password expiration details along with last password change date. These details are used by system to decide when a user must change his/her password.

To view any existing user’s aging information such as expiry date and time, use the following command.

#chage -l username

To change password aging of any user, use the following command.

#chage -M 60 username
#chage -M 60 -m 7 -W 7 userName
Parameters
  1. -M Set maximum number of days
  2. -m Set minimum number of days
  3. -W Set the number of days of warning

14. Lock and Unlock Account Manually

The lock and unlock features are very useful, instead of removing an account from the system, you can lock it for an week or a month. To lock a specific user, you can use the follow command.

# passwd -l accountName

Note : The locked user is still available for root user only. The locking is performed by replacing encrypted password with an (!) string. If someone trying to access the system using this account, he will get an error similar to below.

# su - accountName
This account is currently not available.

To unlock or enable access to an locked account, use the command as. This will remove (!) string with encrypted password.

# passwd -u accountName

15. Enforcing Stronger Passwords

A number of users use soft or weak passwords and their password might be hacked with a dictionary based or brute-force attacks. The ‘pam_cracklib‘ module is available in PAM (Pluggable Authentication Modules) module stack which will force user to set strong passwords. Open the following file with an editor.

Read Also:

# vi /etc/pam.d/system-auth

And add line using credit parameters as (lcredit, ucredit, dcredit and/or ocredit respectively lower-case, upper-case, digit and other)

/lib/security/$ISA/pam_cracklib.so retry=3 minlen=8 lcredit=-1 ucredit=-2 dcredit=-2 ocredit=-1

16. Enable Iptables (Firewall)

It’s highly recommended to enable Linux firewall to secure unauthorised access of your servers. Apply rules in iptables to filters incoming, outgoing and forwarding packets. We can specify the source and destination address to allow and deny in specific udp/tcp port number.

  1. Basic IPTables Guide and Tips

17. Disable Ctrl+Alt+Delete in Inittab

In most Linux distributions, pressing ‘CTRL-ALT-DELETE’ will takes your system to reboot process. So, it’s not a good idea to have this option enabled at least on production servers, if someone by mistakenly does this.

This is defined in ‘/etc/inittab‘ file, if you look closely in that file you will see a line similar to below. By default line is not commented out. We have to comment it out. This particular key sequence signalling will shut-down a system.

# Trap CTRL-ALT-DELETE
#ca::ctrlaltdel:/sbin/shutdown -t3 -r now

18. Checking Accounts for Empty Passwords

Any account having an empty password means its opened for unauthorized access to anyone on the web and it’s a part of security within a Linux server. So, you must make sure all accounts have strong passwords and no one has any authorized access. Empty password accounts are security risks and that can be easily hackable. To check if there were any accounts with empty password, use the following command.

# cat /etc/shadow | awk -F: '($2==""){print $1}'

19. Display SSH Banner Before Login

It’s always a better idea to have an legal banner or security banners with some security warnings before SSH authentication. To set such banners read the following article.

  1. Display SSH Warning Message to Users

20. Monitor User Activities

If you are dealing with lots of users, then its important to collect the information of each user activities and processes consumed by them and analyse them at a later time or in case if any kind of performance, security issues. But how we can monitor and collect user activities information.

There are two useful tools called ‘psacct‘ and ‘acct‘ are used for monitoring user activities and processes on a system. These tools runs in a system background and continuously tracks each user activity on a system and resources consumed by services such as Apache, MySQL, SSH, FTP, etc. For more information about installation, configuration and usage, visit the below url.

  1. Monitor User Activity with psacct or acct Commands

21. Review Logs Regularly

Move logs in dedicated log server, this may prevents intruders to easily modify local logs. Below are the Common Linux default log files name and their usage:

  1. /var/log/message – Where whole system logs or current activity logs are available.
  2. /var/log/auth.log – Authentication logs.
  3. /var/log/kern.log – Kernel logs.
  4. /var/log/cron.log – Crond logs (cron job).
  5. /var/log/maillog – Mail server logs.
  6. /var/log/boot.log – System boot log.
  7. /var/log/mysqld.log – MySQL database server log file.
  8. /var/log/secure – Authentication log.
  9. /var/log/utmp or /var/log/wtmp : Login records file.
  10. /var/log/yum.log: Yum log files.

22. Important file Backup

In a production system, it is necessary to take important files backup and keep them in safety vault, remote site or offsite for Disasters recovery.

23. NIC Bonding

There are two types of mode in NIC bonding, need to mention in bonding interface.

  1. mode=0 – Round Robin
  2. mode=1 – Active and Backup

NIC Bonding helps us to avoid single point of failure. In NIC bonding, we bond two or more Network Ethernet Cards together and make one single virtual Interface where we can assign IP address to talk with other servers. Our network will be available in case of one NIC Card is down or unavailable due to any reason.

Read Also : Create NIC Channel Bonding in Linux

24. Keep /boot as read-only

Linux kernel and its related files are in /boot directory which is by default as read-write. Changing it to read-only reduces the risk of unauthorized modification of critical boot files. To do this, open “/etc/fstab” file.

# vi /etc/fstab

Add the following line at the bottom, save and close it.

LABEL=/boot     /boot     ext2     defaults,ro     1 2

Please note that you need to reset the change to read-write if you need to upgrade the kernel in future.

25. Ignore ICMP or Broadcast Request

Add following line in “/etc/sysctl.conf” file to ignore ping or broadcast request.

Ignore ICMP request:
net.ipv4.icmp_echo_ignore_all = 1

Ignore Broadcast request:
net.ipv4.icmp_echo_ignore_broadcasts = 1

Load new settings or changes, by running following command

#sysctl -p

Leave a Reply

Your email address will not be published. Required fields are marked *